How to Install UHMWPE Rink Board Edge Cap Trim

Overview

This guide covers the practical steps to install uhmwpe rink board edge cap trim. JS Polymers produces engineering plastic components in UHMWPE, HDPE, PA, POM and PTFE — full-process fabrication from raw sheet to CNC-machined parts.

Step-by-step procedure

1. Measure rink perimeter. Add cap length around all sides plus corners.
2. Mark fastening points. Bolt at 600mm spacing into subfloor.
3. Drill panel and subfloor. Pilot drill through cap and panel into subfloor.
4. Mechanical fastening. Use stainless screws with washer; flush-mount heads.
5. Verify no panel lift. Apply downward force; verify T&G stays engaged.

Need help?

Our engineering team reviews drawings within 24 hours. We have shipped to 80+ countries across 4 continents and hold ISO 9001 certification.