Overview

This guide covers the practical steps to prevent uhmwpe synthetic ice panel warping. JS Polymers produces engineering plastic components in UHMWPE, HDPE, PA, POM and PTFE — full-process fabrication from raw sheet to CNC-machined parts.

Step-by-step procedure

1. Acclimatize before install. Stack panels in install room 48 hours before laying.
2. Avoid direct sunlight. UV can soften edges over time; cover when not in use.
3. Allow expansion gaps. Leave 5mm gap to walls for thermal movement.
4. Use full-area edge trim. Edge cap holds panels flat against subfloor.
5. Monitor and adjust. Re-tap joints monthly; trim if expansion exceeds gap.

Need help?

Our engineering team reviews drawings within 24 hours. We have shipped to 80+ countries across 4 continents and hold ISO 9001 certification.